Murex Welding Products Ltd., Inverter-based welding power source

ipesearch.com

Click to visit http://www.eriks.co.uk/bigplus/products.asp

Home

Latest Newsletter

Articles

Products & Services

Companies

Advertisers Area

Link to us

Exhibitions

Affiliate Links

Other Publications

Contact

Get Your Free Magazine Here

Get your free copy today!

In association with

Igus


	What next? Request further Information visit web site Send to friend Murex Welding Products Ltd. company's profile

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit http://air.irco.com/uk/

Click to visit sponsors web site

Click to visit sponsors web site

Click here to visit the Energy Event website

Click here for the latest compressed air news !

Inverter-based welding power source
March 1st 2007

The Tradestig Dual 151i is an inverter-based, electronic controlled welding power source from Murex Welding Products.

It is said to offer high quality DC arc characteristics for TIG and MMA welding from both 110V and 230V supplies. Weighing just 11kg, the unit is easily moved around the workplace and is therefore suitable for maintenance and repair work.

Tradestig Dual 151i meets the requirements of EN 60974-1 and EN 50199. It is suitable for TIG welding most metals, including stainless and other difficult to weld materials of between 0.5 and 4mm thicknesses.

For MMA welding, a wide range of electrodes up to 3.2mm in diameter can be used.

The unit provides 10 to 150A output, with 150A at up to 60% duty.

Two- and four-stroke torch switch operating modes are also built in.

Full remote control facilities are provided.

More articles from Murex Welding Products Ltd.:

Arc welding solutions (1st July 2008)

The latest welding units in the Murex Tradesarc feature large cable connectors for durability and an impact resistant polymer and aluminium casing.

From Production engineering

Replacement recommendations for regulators and flashback arrestors (27th June 2008)

All those involved in gas welding and cutting are reminded by Murex Welding Products that the elastomeric components of pressure regulators and flashback arrestors will deteriorate with age. This can result in units failing in service, resulting in a discharge of gas from the over-pressure relief valve and the creation of potentially unsafe indoor working environments...

From Newsletter Stories

Compact units (1st May 2008)

Suitable for heavy duty and medium MIG and MAG welding applications, the Murex Transmig 300C and 350C step-controlled compact machines feature sturdy construction and galvanised housings.

From Production engineering

All about gas (1st March 2008)

Murex Welding Products has announced dates for its City & Guilds of London Accredited Gas Equipment Inspection Courses.

From Health safety welfare

Fit and forget (1st March 2008)

The new Murex Saffire 300 series regulator for MIG welding is said to be a true 'fit and forget' solution that gives stable control of gas flow rates. It includes a number of safety and control features that ensure a st

From Health safety welfare

Plan for 2008 (1st January 2008)

Murex has a number of its 2008 Welding Product wall planners to give away on a first-come, first served basis, along with a Murex branded pen for anyone requesting its Saffire Gas Welding and cutting equipment brochure.

From Production engineering

Light duty welding (1st November 2007)

Light duty welding tasks in body shops or around the farm require simple to use and versatile welding equipment. Murex says it has the answer with its Tradesmig 140-1 unit that weighs just 25kg. A single phase 230V welding ma

From Production engineering

Multi and single stage (1st September 2007)

The Murex range of Saffire high pressure regulators includes both Multi-stage and single-stage versions. They provide precise control of gases and all models are designed to comply with BS EN ISO 2503 and are manufact

From Plant process control

Flashback arrestors (1st July 2007)

Murex Saffire flashback arrestors provide a high level of protection for the operator and his equipment in the event of a flashback caused by conditions such as sustained backfire, incorrect hose purging or simply the w

From Production engineering

Welding pack (1st May 2007)

The Murex Transweld Challenger 400 welding package includes the Transweld Challenger 400 power source, Transmatic 4C wire feed units, 5m connection set and welding torch. The package is featured in free technical litera

From Production engineering

Small and portable welder (1st March 2007)

The Murex Tradestig AC/DC 161iS welding power source is a small and portable, inverter based unit that provides 10A to 160A AC & DC TIG welding for bodyshops, repair and light fabrication applications.

Incorporating a powerf

From Production engineering

For welding (1st January 2007)

For less complex welding tasks where quality is important, Murex Welding Products has introduced the Tradesmig 140-1.

Its built-in wire feeder and low weight (25kg) make it a practical solution for light fabricators, auto re

From Production engineering

Welding power (1st November 2006)

Available from Murex Welding Products, the Tradesmig 210-1 professional welding power source is principally designed for sheet metalwork and light fabrication applications. It is available as a stand-alone unit or as part of

From Production engineering

New seminar (1st July 2006)

With increasing use of the oxy-fuel gas process, Murex Welding Products now offers purposedesigned hazard awareness and risk assessment seminars.

From Health safety welfare

Versatile portable welding machines for TIG and MMA (22nd June 2006)

Murex says its Tradestig DC 150-1 and DC200-1 are versatile portable welding machines capable of welding most materials in thickness ranging from 0.5-6mm. They have IP23 protection and are capable of withstading the toughest of industrial and repair

From Newsletter Stories

MIG composites (1st May 2006)

New literature from Murex Welding Products describes the company's single-phase, compact MIG/MAG power source with built-in wire feed systems.

From Production engineering

Tig Welder (1st January 2006)

The new Transtig AC/DC 253iS from Murex Welding Products can carry out TIG or MMA welding operations in either AC or DC process modes, providing high performance levels -ptypically 250A TIG rating at 40% duty and 250A MMA rating at 35% duty.

From Production engineering

Compact welding machines (1st November 2005)

The new Murex Transmig 300C and 350C step-controlled compact welding machines can be used for medium or heavy-duty applications MIG or MAG welding.

From Production engineering

Outfits for all welding needs (1st July 2005)

Murex Welding Products offers welding and cutting outfits to suit all applications. Purpose designed, each is tailored to a particular market sector, ranging from heavy duty industrial to micro welding.

From Production engineering

Powered unit (1st March 2005)

Multiflow powered respiratory systems from Murex comprise air filter unit, air hose and one of an approved range of head units.

From Health safety welfare

Fast reacting (1st January 2005)

Murex Welding Products� 9-13 Multiweld helmet has a reaction time of just 1/20 000 of a second and provides both full ultraviolet and infrared protection.

From Production engineering

For all-round visibility (1st September 2004)

Available from Murex Welding Products, the Multiview welding helmet is designed to provide a high level of visual coverage and facial protection for the wearer.

From Production engineering

Latest discs (1st July 2004)

A new range of grinding and cutting discs is available from Murex Welding Products. Features claimed include high safety levels, efficiency combined with fast cutting, long life and economic operation.

From Production engineering

Welding poster (1st May 2004)

The cored wire range from Murex Welding Products is said to provide the fabricator with a selection of products for many applications at welding speeds up to three times faster than manual metal arc electrodes.

From Production engineering

Welding literature (1st May 2004)

Literature is available from Murex Welding Products detailing the companys latest products for mig, tig, mma welders, as well as plasma cutting equipment.

From Production engineering

Respirator guide (1st May 2004)

Selecting the most appropriate disposable face mask to provide protection when welding or metalworking can be difficult. One of the benefits of the partnership between Murex Welding Products and mask manufacturer 3M is a respirator performance guide

From Health safety welfare

Free brochure (1st January 2004)

Personal protection products, welding tools and special process equipment are the three principal accessory ranges available from Murex Welding Products. They are included in a new 70 page Accessories catalogue that includes items such as helmets, cl

From Production engineering

Grinding and cutting discs (1st November 2003)

Now available from Murex Welding Products is the new Rasta range of Murex branded abrasive cutting and grinding discs. The Swiss made product line includes: general purpose grinding discs for steel and grey cast metal; special discs for aluminium and

From Production engineering

Weld quality (1st September 2003)

Heil Europe is a world leader in the design and manufacture of refuse collection vehicles. It makes the complete body from raw materials and considers welding and fabrication to be a core competence. To support this the company has invested in 25 Mur

From Production engineering