| |
Insert range
September 1st 2007 Walter GB has expanded its insert
range for tuning steel with the
launch of positive geometry
Tiger.tec Steel grades WPP 10, 20,
30 – as well as a free 58–page
booklet that details the range.
The new inserts ensure highlyaccurate
finishing from a 0.1mm
depth of cut at 0.04mm per rev
feed, up to 15mm depths at 1.7mm
per rev, on the 32mm diameter
RCMX insert styles. Insert grade
WPP 20 is designed for aggressive
roughing, and applications where
medium interruptions and unstable
set-ups are likely. WPP 30 caters
for interrupted roughing cuts and
where surface speeds are difficult
to attain due to machine limitations
or small diameter applications. |
