Sensonics Ltd, Latest guide

ipesearch.com

Click to visit http://www.eriks.co.uk/bigplus/


	What next? Request further Information visit web site Send to friend Sensonics Ltd company's profile

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit http://air.irco.com/uk/

Machine Building 2009

MTec 2009

Click here for the latest compressed air news !

Latest guide
January 1st 2006

Sensonics has introduced a 28- page Turbine Supervisory Guide that explains the basics of vibration and expansion measurement techniques relating to turbine and auxiliary plant.

The guide points out that problems such as cracked rotors and damaged shafts can be avoided with the application of appropriate monitoring equipment, allowing faults to be detected in the early stages, thereby avoiding lengthy shutdown of the turbine.

Maintec Stand number H22

More articles from Sensonics Ltd:

Protecting power generation (1st September 2008)

Turbine supervisory and high integrity protection equipment from Sensonics has played a part in the successful upgrading of condition monitoring equipment at RWE Npower Fawley Power Station.

From Plant process control

Vibration transducer (1st May 2008)

Shown by Sensonics at this year's Maintec exhibition was an ATEXapproved vibration transducer capable of operating in excess of 450°C. The PZEHT offers ICP type connectivity by separating the high temperature element fr

From Plant process control

Cooling fans vibration monitor (1st May 2008)

Cooling fans on CCGT power stations are a solution for the removal of unwanted energy. They also play a critical role in the overall generation process. Fans are driven through a motor and gearbox combination, but gearb

From Plant process control

Hot vibes with no sweat (27th February 2008)

This year’s focus on the Sensonics Maintec exhibition stand will primarily be targeted at high temperature vibration measurement...

From Newsletter Stories

Hot vibes (1st January 2008)

The focus of the Sensonics stand at Maintec will be high temperature vibration measurement.

From Plant process control

Differential expansion measurement (1st September 2007)

Didcot A Power Station has been successfully using a differential expansion technique incorporating a time measurement method based on a series of plates fitted around the shaft at the appropriate rotor section.

From Plant process control

Show debut (1st May 2007)

Maintec 2007 was the launch venue for Sensonics' SIL2 rated fan or centrifuge protection with DN2611 dual channel vibration protection monitor.

From Plant process control

Sentry news (1st January 2007)

Sensonics has updated its Sentry overspeed protection system that deals with turbine overspeed problems and trip failures in the power generation industry.

The company was recently asked to supply a special, small package, f

From Production engineering

Predictive maintenance (1st January 2007)

Sensonics will be releasing its new 20 page Vibration Transducer Catalogue and displaying other detailed technical literature at the Maintec exhibition (Stand F9). The new brochure offers a wide range of solutions for a vast

From Plant process control

Strong growth (1st September 2006)

A business boom at global predictive maintenance systems specialist, Sensonics, has led to the company investing in new workshop equipment and additional staff.

From Plant process control

Keeping the wheels turning (1st January 2006)

IP&E visited Sensonics to find out what this UK company is doing in the never ending battle to keep the wheels of industry turning

From Premises management maintenance

Vibration check (1st July 2005)

Sensonics has updated the condition monitoring system at a petroleum storage depot in Essex and retrofitted a vibration detection system.

From Plant process control

REMOTE CON MON (1st March 2005)

On show at Maintec 2005 on the Sensonics stand was the DN36 Spydernet 8 channel ethernet connectable vibration and process monitoring system.

From News

Remote con mon solutions (1st January 2005)

Sensonics will be featuring aspects of its predictive maintenance systems equipment at Maintec 2005.

From Plant process control

New products (1st May 2004)

Recent products from Sensonics include the DN36 Spyder range of machine monitoring and protection equipment, the SpyderNet plug-in and play monitor and the DN2601 dual channel, vibration (or vibration and temperature) alarm monitor.

From Plant process control

NEW MONITORS (1st March 2004)

Sensonics has just launched two new monitors; the DN36 Spyder range of machine monitoring and protection equipment and the new SpyderNet plug n play monitor. The DN36 family is line stackable to ensure rapid system integration/installation and minima

From News

atex secured (1st March 2004)

Sensonics has secured atex approval for its range of PZ velocity transducers, accelerometers and AECP eddy current probes for use in the measurement of vibration and non-contact displacement. The companys PZ velocity transducers are robust and suitab

From Plant process control

DUAL ALARM (1st November 2003)

Available from Sensonics is a new dual channel vibration or vibration and temperature alarm monitor. The DN2601 is suitable for use where predictive maintenance practices are operational and where continuously rotating equipment such as turbines, mot

From Plant process control