Michael Smith Engineers Ltd, Stainless steel vane pumps

ipesearch.com

Click to visit http://www.ni.com/vision/


	What next? Request further Information visit web site Send to friend Michael Smith Engineers Ltd company's profile

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit http://air.irco.com/uk/

Click to visit sponsors web site

Click to visit sponsors web site

Machine Building 2009

MTec 2009

Click here for the latest compressed air news !

Stainless steel vane pumps
March 1st 2008

Where reliability and durability are high priorities when choosing a pump for transferring corrosive or thin liquids at higher pressures, Viking LVP stainless steel vane pumps from Michael Smith Engineers, offer a solution.

Vanes extend from slots in the pump rotor and these help to sweep liquid through a camshaped cavity. This ensures low slip and high volumetric efficiency at all points on the performance curve, which contributes to longer pump life and low life-cycle cost.

The LVP range covers flow rates to 36m3, pressures to 14bar and handles liquids with viscosities from 0.1 to 500 cSt. Units provide smooth, non-pulsating, low-shear flows and have good suction lift capability.

More articles from Michael Smith Engineers Ltd:

Leak-free pumps (1st March 2008)

Plastic, magnet-driven centrifugal pumps for use in the most corrosive and challenging environments have been introduced by Michael Smith Engineers.

From Plant process control

Pump for aggressive fluids (1st July 2007)

Portable drum and barrel emptying pumps are a simple and effective device for transferring a wide range of fluids from tanks, drums, barrels and IBCs. Michael Smith Engineers has recently added a new lower cost option t

From Plant process control

Keep pumping not waiting (1st July 2007)

Described as powerful, fast, economical and versatile, the new Finish Thompson SP series magnetic drive, self-priming centrifugal pumps are available through Michael Smith Engineers.

From Plant process control

Built for long life (1st January 2007)

Available through Michael Smith Engineers, Hydra-Cell sealless positive displacement pumps are designed for long life even in the most arduous of conditions.

Suitable for use in clean, dirty, hot, high pressure, low pressure

From Plant process control

Resists corrosives (1st November 2006)

The new Finnish Thompson DB series of sealless, plastic magnetic drive centrifugal pumps are designed to withstand the effects of corrosive fluids.

Available through Michael Smith Engineers, the pumps are said to promise out

From Plant process control

Leak-free for hot oil (1st September 2006)

A magnetically coupled centrifugal pump from Michael Smith Engineers offers sealless design combined with a hermetically sealed liquid end to give zero leakage.

From Plant process control

Non-metallic pump (1st July 2006)

The latest industrial gear pumps from Michael Smith Engineers are said to offer excellent corrosion resistance and optimum reliability due to their simplified design and the use of tough, non-metallic materials for all wetted parts.

From Plant process control

Resists corrosives (1st May 2006)

Ultrachem pumps are designed to transfer aggressive fluids in tough chemical process applications. The ANSI dimensional, magnetically driven pumps are made from a tough ductile iron casing with a Tefzel (ETFE) lining that is said to provide optimum c

From Plant process control

Solution to Delicate Matter (1st March 2006)

The latest addition to the Ismatec range of tubing pumps is the compact and durable Ecoflow unit that provides low-cost, yet effective liquids transfer of delicate media in OEM, pharmaceutical, biotechnology and other similar critical applications.

From Plant process control

Pulse-free dispensing (1st November 2005)

A pulse-free dispensing pump from Michael Smith Engineers is said to offer excellent repeatability on a wide range of flows. The Reglo Z is a compact, digital drive unit for use with the Micropump range of magnetically coupled gear pump heads.

From Production engineering

Art of pumping (1st September 2005)

The art of pumping thick, viscous fluids such as pastes, gels, syrups, oils and greases from barrels and drums quickly and efficiently depends on a high performance drum pump, according to Finish Thompson, a company that recently developed such a pum

From Plant process control

Leak-free (1st July 2005)

The self-contained, leak-free range of Nikkiso canned motor pumps has been extended with the introduction of the HK Series, a high head, high speed version of the sealless centrifugal pumps.

From Production engineering

MULTI-CHANNEL PUMPS (1st May 2005)

Available from Michael Smith Engineers, Ismatec�s multi-channel tubing pumps have 4, 8, 12 or 24 channels and deliver from 0.002mL to 44mL/min per channel.

From Plant process control

LESS STRESS WHEN PUMPING (1st March 2005)

Areas of potential concentrated or localised stress on Codip airoperated pumps are said to have been eliminated due to the design and operation of the pump�s PTFE tubular diaphragm mechanism.

From Plant process control

SMALL PUMP; BIG PERFORMANCE (1st January 2005)

A better performance from an even smaller pump is the claim made for the latest addition to the range of Micropump Gear Pump options available from Michael Smith Engineers.

From Plant process control

More drive options (1st September 2004)

Introduction of a metric motor adaptor for the FMI range of dispensers and metering pumps from Michael Smith Engineers means a significant increase in the drive options for FMI pump heads.

From Plant process control

For solvents (1st July 2004)

The Liquiflo 33 series magnetically coupled gear pump from Michael Smith Engineers pumps solvent based products with viscosities from 0.2 to 10cps.

From Plant process control

Piston pump range (1st March 2004)

Durability and high accuracy are among the benefits claimed for the new range of FMI dispensers and piston pumps available from Michael Smith Engineers. Seven pump sizes are offered, covering flow rates from microlitres to 4600ml/min at discharge pre

From Plant process control

SMOOTH, NON-PULSATING FLOWS (1st January 2004)

A high viscosity drum pump driven by an 800W motor has been introduced by Michael Smith Engineers to provide optimum pumping performance with smooth, non-pulsating flows. The Finish Thompson HVDP is a positive displacement pump with a progressive cav

From Plant process control