Hoerbiger-Origa Ltd, Press control valves

ipesearch.com

Click to visit http://www.ni.com/vision/


	What next? Request further Information visit web site Send to friend Hoerbiger-Origa Ltd company's profile

Click to visit sponsors web site

Click to visit http://air.irco.com/uk/

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Machine Building 2009

MTec 2009

Click here for the latest compressed air news !

Press control valves
January 1st 2008

Hoerbiger-origa has expanded its Airfit Tecno range of intelligent proportional press control valves with new units that offer flow rates four times the current levels and an OEM version designed to replace manual pressure regulators with proportional control functionality.

Airfit Tecno combines piezoelectric technology and precision miniature component engineering that is designed to redefine user expectations for speed and precision of air pressure control.

The piezo control means Tecno is able to offer very high dynamic performance, with such small power consumption that it can readily be operated directly from a PLC output or 4-20mA controller without the need for a separate power supply.

Full range pressure regulation is achievable from 0 to full flow.

More articles from Hoerbiger-Origa Ltd:

Seal printer with servo motor (1st September 2008)

When Travtec Packaging Engineering started developing a hygienic seal film printing machine, it knew that precision linear indexing would be the key to success, so called in Hoerbiger-Origa.

From Handling storing

Pressure control (1st July 2008)

Hoerbiger-Origa has extended its Airfit Control range of proportional pressure regulators with models that, it says, bring truly dynamic control and precise regulation to applications requiring large, rapidly changing p

From Plant process control

Sizing software (1st January 2008)

Hoerbiger-Origa has launched a new sizing programme that assists engineers with sizing and selecting electric linear actuators for particular duties.

From Plant process control

Extreme solutions (1st November 2007)

Hoerbiger-Origa has expanded the range of applications for its rodless pneumatic cylinders by a developing a version that offers temperature compensation. This enables it to be used in extreme heat or cold.

Rodless cylinders

From Plant process control

Extreme solutions (1st November 2007)

Hoerbiger-Origa has expanded the range of applications for its rodless pneumatic cylinders by a developing a version that offers temperature compensation. This enables it to be used in extreme heat or cold.

From Plant process control

Cool actuator (1st September 2007)

Hoerbiger-Origa has expanded the range of applications for its range of rodless pneumatic cylinders by developing a new version that offers temperature compensation so that they can be used in extreme heat or cold.

From Plant process control

Cylinder solutions (1st May 2007)

Hoerbiger-Origa has expanded its range of pneumatic compact cylinders that conform to the latest ISO 21287 standard. Originally available in 12, 16, 20 and 25mm sizes, the new NZ range is available in 32, 40, 50, 63, 80

From Plant process control

Speedy scribing (1st May 2007)

An automated production systems designer has contained costs on his latest machine by using one of the key components to perform two critical functions.

From Plant process control

Valve now comes in two sizes (1st March 2007)

A compact directional pneumatic valve that can operate as two independent valves in a single body (or in conjunction with a manifold) is now available in a new size.

Originally launched by Hoerbiger-Origa in a oneeighth inch

From Plant process control

ATEX dust approved (1st January 2007)

ATEX dust certification has been achieved by HoerbigerOriga rodless pneumatic cylinders. This compliments the existing ATEX gas approval that the cylinders hold.

Rodless pneumatic cylinders differ from conventional cylinders

From Health safety welfare

Efficiency gains (1st September 2005)

The productivity of bead cutting for uPVC window frames can now be increased, says Jade Engineering, following the development of an automated length stop for use with its JS 250P CNC bead saw.

From Production engineering

A tough new FRL (1st March 2005)

Hoerbiger-Origa has launched A25, a new G1 (1in port) sized FRL (filter/regulator/lubricator) for controlling the quality of compressed air, particularly in demanding environments.

From News

Downtime cut (1st May 2004)

Swapping from pneumatic power to an electric cylinder supplied by Hoerbiger-Origa, coupled with a bit of a redesign, has slashed maintenance time on a slitter positioning system for St Regis, Kemsley paper mill near Maidstone.

From Plant process control

ATEX ALERT (1st November 2003)

An explanatory publication has been compiled by Hoerbiger-Origa on how pneumatic systems are affected by the new atex 95 directive on explosive atmospheres, that replaced atex 100a in July 2003. Under the new regime, responsibility for safety of newl

From Plant process control

HEAVY DUTY (1st September 2003)

Hoerbiger-Origa has extended its Airfit family of industrial air preparation equipment with the introduction of a heavy duty G2 (2in) filter/regulator/lubricator or FRL, called the A50 series. The robust A50 is intended for use in the main line of la

From Plant process control