Register | Login | Set as Home Page | Bookmark | General Enquiries | Help | Thursday, 08th of January 2009
IPE Logo
ipesearch.com
Search 
Magazine 
Register for our ENewsletter
Click to visit http://www.ni.com/vision/

What next?
 Request further Information    visit web site     Send to friend
 Spirax Sarco Ltd company's profile
Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site



Click to visit http://air.irco.com/uk/

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit http://www.easyfairs.com/bantrack/banner_tracker.asp?banner_id=175

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Machine Building 2009
MTec 2009



Click here for the latest compressed air news !

Design & supply
November 1st 2004

Spirax Sarco’s involvement in the design and supply of a complex hot water control system has helped Pirelli meet a tight deadline for expanding tyre production at its European Centre of Excellence for Sports Utility Vehicle (SUV) Tyres, Carlisle.

High pressure hot water is used to cure the tyres and a new plant was needed to meet planned production increases.

Using parameters from Pirelli, Spirax Sarco designed the hot water plant’s control system and supplied a range of isolation and pneumaticallyactuated control valves.

John Wilson, utilities engineer at Pirelli, says We had just nine days in which to remove the previous plant and install the new one. The system worked first time and has provoked interest from elsewhere in the Pirelli group.

It uses steam to supply water at high pressure and high temperature. Spirax Sarco valves on the steam side control water temperature and pressure.

Other Spirax Sarco valves control the hot water makeup and system backpressure.

More articles from Spirax Sarco Ltd: