Flowserve Flow Control UK Ltd, Steam trap monitor

ipesearch.com

Click to visit http://www.ni.com/vision/


	What next? Request further Information visit web site Send to friend Flowserve Flow Control UK Ltd company's profile

Click to visit sponsors web site

Click to visit http://air.irco.com/uk/

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Machine Building 2009

MTec 2009

Click here for the latest compressed air news !

Steam trap monitor
July 1st 2007

The new Gestra VKP 40 TRAPtest steam trap monitor from Flowserve can detect failed or under-performing traps in-situ, making it suitable for engineers to identify and isolate problems as part of routine troubleshooting or when undertaking full inspections within a planned maintenance programme. The VKP 40 is designed for universal application covering all makes and kinds of steam traps as it detects and evaluates ultrasonic vibrations on the casing surface of the trap during operation.

These vibrations are compared against pre-sets for fully functional traps and a graphic presentation of the measurement results is displayed on an illuminated LCD screen in the form of a standing curve. An integrated temperature measurement facility has also been added to the VKP40 to help identify obstructed (banked-up) traps

More articles from Flowserve Flow Control UK Ltd:

Managing blowdown (1st September 2007)

A critical part of maintaining optimum steam boiler performance is blowdown but, unless it is managed efficiently, blowdown can also be a major contributor to loss of valuable heat energy and chemically treated boilerwa

From Energy management

Steam trap addition (1st January 2007)

Flowserve Gestra has introduced the UNA38 steam trap for use with high flow rates of high-pressure condensate in steam systems.

The UNA38 features a robust ballfloat and needle-closing mechanism with a large condensate disch

From Plant process control

Fill spector (1st July 2006)

Steam and process fluid control specialist Flowserve Gestra has been taking to the roads across Europe with its demonstration rig. The lorry and trailer combo provides demonstrations of Gestra's range of steam and condensate systems and like-for-like

From Plant process control

Valve demonstrates reliability (1st March 2006)

In just over eight years seven Worcester Envirosafe ball valves and Norbro pneumatic actuators have completed 12 million cycles on a demanding application at a Middlesboroughbased fine chemicals manufacturer.

From Plant process control

SENDING OUT THE RIGHT SIGNAL (1st September 2005)

Guided wave radar level probes from Flowserve Gestra have enabled a large chemical plant in Cheshire to overcome problems with modulating boiler level controls.

From Plant process control

NEW MONITOR (1st September 2005)

The new OR52 oil and turbidity detector from Flowserve Gestra is the latest addition to a range of monitoring devices that make use of the company�s digital technology.

From News

Valve wrench (1st July 2005)

A tamperproof, lockable valve wrench from Flowserve Flow Control ensures that a valve can only be operated by authorised users. It has been developed for process applications where valve position integrity could have a significant safety impact, such

From Production engineering

Self-venting (1st May 2005)

Stored energy from liquid or gas locked in a process system once a valve has been closed can be a serious hazard downstream when equipment is being maintained, says Flowserve Flow Control (UK).

From Plant process control