Drain repair
January 1st 2008 Dyno-Rod's in2 no-dig drain repair
has been used successfully at a
property in Hindhead, where
sections of pitch fibre pipe have
been replaced with minimal
inconvenience.
The deformed pipe and protrusion
of bricks into the drainage system
had resulted in water and debris
being trapped inside – with the
inevitable drain blockage. The
100mm diameter pitch fibre pipe
was deformed up to 75% in places.
The in2 solution offered savings
in time, disruption and cost. A
durable factory-produced pipe was
installed within a void created by
breaking out the damaged pipe
work with a special re-forming tool.
Dyno-Rod installed the 100mm
diameter pipe manhole-to-manhole
over a distance of 16m, having
made a small excavation in the
downstream manhole of a
neighbouring property. More articles from Dyno-Rod Ltd: | 
