Free pressure module (1st September 2008)

Until 15th December 2008, Fluke is offering a free Pressure Module to purchasers of a Fluke HART Documenting Process calibrator.

From Plant process control

  Combo Kit (1st September 2008)

Offering an affordable approach to industrial condition monitoring, the Fluke 289/FVF Combo Kit comprises a true-rms Fluke 289 Industrial Logging Multimeter plus FlukeView Forms software, which facilitates comparisons w

From Plant process control

  Three-phase (1st May 2008)

Fluke has an extensive range of test and measurement instruments for electrical applications. The company offers a complete range of rugged Power Quality tools for three-phase systems, with a choice of solutions for pin

From Plant process control

  Free seminars (1st May 2008)

Fluke is offering a series of free Thermal Imaging Training Seminars during 2008 at locations around the UK and Ireland where electricians and maintenance technicians can gain hands-on experience of handheld thermal im

From Plant process control

Thermal imagers hot up (14th April 2008)

Fluke have brought out two new high-performance thermal imagers, the Ti25 and the Ti10, to perform troubleshooting and maintenance tasks...

From Newsletter Stories

  Thermal imagers hot up (1st March 2008)

Fluke have brought out two new high-performance thermal imagers, the Ti25 and the Ti10, to perform troubleshooting and maintenance tasks. Infrared and visible light images in full screen or picture-inpicture views are i

From Plant process control

  Quick to detect equipment problems (1st January 2008)

New thermal imagers from Fluke (UK) are designed to make thermal imaging affordable and effective for day-today troubleshooting and maintenance of electrical installations, electro-mechanical and process equipment, HVA

From Plant process control

  Rapid detection (1st January 2008)

Fluke's new Ti25 and Ti10 thermal imagers offer affordable and rapid problem detection. The rugged, thermal imagers feature IR Fusion technology which integrates IR and visible light images

From Plant process control

  In the picture (1st November 2007)

A thermal imager is available from Fluke for capturing high quality images in industrial maintenance applications. The Ti35 is fully radiometric and has a 180° articulating lens for viewing and capturing images in areas with

From Plant process control

  Putting calibration in the picture (1st November 2007)

With a wide variety of mechanical and electrical thermometers used to sense and control process temperatures, regular and accurate calibration is vital. Fluke Precision Measurement has developed its latest two products to be used in industrial premises, and not just specialist laboratories

From Plant process control

Thermal imager maintenance kits (26th October 2007)

Fluke is offering either a free Fluke 87V/i410 combo kit or a free Fluke 337 clamp meter, together with a free thermal imaging DVD, to purchasers of the Fluke Ti20 thermal imager...

From Newsletter Stories

  Troubleshooting kit for drives (1st September 2007)

Fluke is offering a money-saving Industrial Combo Kit for troubleshooting motor drives and other electromechanical equipment, as well as plant automation and power distribution systems.

From Plant process control

  Process clamp meter (1st July 2007)

Fluke has introduced the Fluke 771 Milliamp Process Clamp Meter, which measures 4-20mA output signals from transmitters in process and industrial control system applications without breaking the current loop. Offering

From Plant process control

Free DVD and 7-day thermal imager trials (25th June 2007)

Fluke, supplier of handheld test and measurement equipment, is offering free, no obligation, 7-day trials of its Fluke Ti20 Thermal Imager on a customer’s premises...

From Newsletter Stories

  3 tools in 1 (1st May 2007)

The 922 Airflow Meter is the latest tool to be introduced by Fluke.

From Energy management

  Power quality (1st January 2007)

Fluke now offers a complete range of power quality tools for threephase systems, offering a choice of solutions for pinpointing power problems quickly in a wide range of industrial, commercial and domestic installations.

The

From Energy management

  Focus on thermal imaging (1st January 2007)

Fluke has a wide range of easy-touse thermal imagers, providing a choice of rugged, fully radiometric solutions for industrial maintenance engineers and for Predictive Maintenance (PdM) applications.

Fluke also offers a vari

From Plant process control

Free thermal imaging DVD (22nd November 2006)

Fluke, the supplier of handheld test and measurement equipment, is offering a free, educational, Thermal Imaging Application DVD which explains how thermal imagers can be put into best practice in industrial applications.

From Newsletter Stories

  Easy-to-use thermal imagers (1st November 2006)

Fluke is now offering a wide range of easy-to-use thermal imagers which it is supporting with a variety of training courses, a free thermography guide and a free DVD.

The Fluke Ti20 Infrared Thermal Imager provides detailed,

From Plant process control

  Precision Digital Mutimeters (1st November 2006)

New from Fluke is the 8845A and 8846A Precision Digital Multimeters, featuring 6.5 digit resolution, a dual display that shows data in graphic or numeric formats, and multifunction measurement capability.

These high-accuracy

From Plant process control

  Free thermal imaging DVD (1st November 2006)

Fluke, the supplier of handheld test and measurement equipment, is offering a free, educational, Thermal Imaging Application DVD which explains how thermal imagers can be put into best practice in industrial applications.

Th

From Plant process control

  Extended range (1st November 2006)

The specialist in handheld electronic test and measurement technology, Fluke has extended its 110 Series of rugged, compact, true-RMS digital multimeters (DMMs) with a family of four, each designed to meet the specific needs

From Premises management maintenance

New Fluke power quality loggers (19th September 2006)

Fluke has extended its range of 3-phase power quality loggers with the Fluke 1740 Series. Designed to simultaneously log up to 500 parameters for up to 85 days, the new series helps to uncover intermittent and hard-to-find power quality issues for technicians troubleshooting and analysing power distribution systems.

From Newsletter Stories

  Nine new calibrators (1st September 2006)

Nine new models have been added by Fluke to its family of pressure calibrators, including two for measurements up to 20bar.

From Plant process control

  New thermal imager offers powerful diagnostics (1st September 2006)

The Ti20 infrared thermal imager from Fluke is said to bring the powerful diagnostic and predictive capabilities of infrared thermography within reach of industrial maintenance engineers.

From Plant process control

  Preventing downtime (1st September 2006)

Ken West, regional marketing manager Industrial Tools, Fluke (UK) explains the the use of thermal imagers in predictive maintenance.

From Plant process control

  Predictive fusion images (1st July 2006)

Handheld test and measurement equipment supplier Fluke has extended its range of fully radiometric thermal imagers with the IR FlexCam Series, intended for experts in Predictive Maintenance (PdM).

From Plant process control

  Class A analyser (1st May 2006)

Following the acquisition of LEM instruments, a division of LEM Group, Fluke has introduced the first power quality analyser to offer IEC 61000-4-30 Class A compliance for accuracy up to 0.1% and synchronisation to power frequency and GPS time regist

From Energy management

  Free test tool book (1st May 2006)

The free, 2006 Test Tools Catalogue from Fluke has been released. The 92 page full colour book can be requested by engineers, electricians, technicians and troubleshooters by calling 0207 942 0700 or via the Fluke web site at

From Plant process control

  IR in reach (1st May 2006)

The powerful diagnostic and predictive capabilities of infrared thermography within reach of industrial engineers, Fluke has introduced the Ti20 Infrared Thermal Imager.

From Plant process control

  Test tools catalogue (1st March 2006)

Free from Fluke, the 2006 Test Tools catalogue comprises 92 pages and is packed with information that goes beyond mere product data.

From Plant process control

  Tests tools (1st January 2006)

Fluke will be showing a wide range of test tools at Maintec 2006, including thermal imaging and IR thermometry products designed for predictive and preventative maintenance.

From Premises management maintenance

  PWM solver (1st January 2006)

A free downloadable application note from www.fluke.co.uk (via the 'Applications' drop down menu) explains how a handheld Fluke 190 Series ScopeMeter makes it easy to troubleshoot pulse-widthmodulated (PWM) variable speed drives using the oscilloscop

From Premises management maintenance

  Calibrator accuracy (1st January 2006)

Fluke's new multi-function process calibrator has measurement and calibration sourcing accuracies to 0.01%. The instrument can measure and source almost all process parameters and can calibrate practically all sensors and transmitters. It will also c

From Plant process control

Free Fluke thermography application guide (30th November 2005)

Fluke is offering a free educational thermography application guide which explains how thermography and thermal imagers can be utilised to locate and troubleshoot hotspots around commercial buildings and industrial complexes.

From Newsletter Stories

FREE GUIDE (1st November 2005)

Fluke is offering free a thermography application guide that explains how thermography and thermal imagers can be used to locate and troubleshoot hotspots around industrial buildings and commercial complexes.

From News

New imager (1st September 2005)

The new Fluke Ti30 thermal imager is intended for IR preventive and predictive maintenance at industrial and large commercial property sites. A radiometric, thermal image shows absolute temperature across a two-dimensional picture, making problem ide

From In depth report

  IR pistol-grip thermometers (1st July 2005)

Infrared pistol-grip thermometers from Fluke combine ease of use with high precision. Featuring a true dimension laser sighting system for precise targeting, they are suitable for predictive and preventive maintenance, particularly for rotating, elec

From Plant process control

  Free DVD (1st March 2005)

An electrical measurement safety information programme is available free from Fluke. Based on guidelines from the IEC and other safety regulators, it is designed to help reduce hazards for personnel measuring electrical energy and to help reduce risk

From Health safety welfare

  QUALITY CHECK (1st November 2004)

Fluke has launched a series of three-phase handheld power quality analysers with features that enable problems to be accessed faster and in greater detail.

From Energy management

  SPECIAL OFFER (1st November 2003)

Until the end of 2003 Fluke is offering its Category III electrical test tool kits with free tool or price discount, depending on the products bought. The Fluke T5-H5-1AC kit includes a T5-1000 electrical tester and H5 belt holster, bundled with a fr

From Plant process control

FREE GIFTS (1st September 2003)

Fluke is offering a choice from six free accessories in a limited period promotion of its CAT III 1000V/CAT IV 600V safety approved, general purpose and high-end series digital multimeters. Any buyer of a 170 or 180 Series DMM from a Fluke European a

From News