Parker Filtration, Warns of contamination

ipesearch.com

Click to visit http://www.ni.com/vision/


	What next? Request further Information visit web site Send to friend Parker Filtration company's profile

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit http://www.easyfairs.com/bantrack/banner_tracker.asp?banner_id=175

Click to visit sponsors web site

Click to visit http://air.irco.com/uk/

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Machine Building 2009

MTec 2009

Click here for the latest compressed air news !

Warns of contamination
July 1st 2006

A new moisture sensor from Parker Hannifin's Filter Division Europe is designed to help eliminate the problems caused by moisture forming in hydraulic oils used in applications ranging from paper manufacturing to car body panel pressing and in mobile hydraulic equipment.

The MS150 is quick and easy to install and set up, both by OEMs and users. It is compact, lightweight and is said to be extremely accurate and available at low cost.

The device incorporates a flow-through sensor cell that is installed directly in the flow stream to produce an accurate reading that shows the real time percentage of moisture present in the operating fluid; this includes petroleum and syntheticbased hydraulic and lubricating oils.

More articles from Parker Filtration:

Modular high power ac drive (1st September 2007)

Parker SSD Drives has launched a modular, high power AC drive system that has been developed to help customers reduce installation time and costs. The 890PX is claimed to be easy to install, simply requiring connection

From Plant process control

Cylinder selection made easy (1st March 2007)

Motion and control technology supplier, Parker Hannifin has released a new catalogue detailing the features and specifications of its 2H Series hydraulic cylinders. The heavy duty cylinders incorporate a number of features su

From Plant process control

Nitrogen generator: a racing success (1st March 2007)

The Process Filtration Division of Parker Hannifin has supplied its TyreSaver nitrogen generator technology to Nexa Racing, Formula BMW UK Champions.

Andy Kidby, MD of Nexa racing, says "The Parker TyreSaver enables us to fi

From Premises management maintenance

Extends tyre life (1st January 2007)

The Process Filtration Division of Parker Hannifin has supplied its TruckTyreSaver nitrogen generator system to Volvo Truck Centres in Sweden, enabling the Centres to provide a fast, efficient tyre filling service.

From Plant process control

Larger air prep (1st January 2007)

Parker Hannifin has added the new Moduflex 80 range of products to its Moduflex modular air preparation system – which extend the versatility and convenience of the FRL system to applications that involve large air volumes, a

From Plant process control

Shipshape refit (1st January 2007)

HMS Ocean needed safe and reliable hydraulic hoses that would operate in the sometimes harsh conditions on-board. Rotec Hydraulics installed Parker's latest Defender hydraulic hoses in order to fit the bill

Rotec Hydraulics

From Plant process control

Free guide (1st September 2006)

Parker Instrumentation has published a 20-page guide to a new technology for interfacing differential pressure transmitters to process piping.

From Plant process control

Cutting the cost of nitrogen (1st September 2006)

Parker Filtration & Separation, part of the Parker Hannifin Filtration Division Europe, explains how the latest membrane technology is cutting the cost of producing nitrogen for industrial use.

From Plant process control

Reduce leak potential (1st July 2006)

Parker Instrumentation has launched a new integrated mounting and manifold block called CCIMS. The block will connect instruments directly to process piping in less time than was previously the case and dramatically reduce the number of joints and t

From Plant process control

Massive savings with mounting and manifold block (30th May 2006)

Parker Instrumentation says its CCIMS is a radical new integrated mounting and manifold block which connects instruments directly to process piping in a fraction of the time previously taken, and dramatically reduces the number of joints – and theref

From Newsletter Stories

Smart dryer gives economical operation (1st May 2006)

The Process Air and Gas Filtration Division of Parker Hannifin has introduced a new series of Balston Smart dryers. The membrane air dryers combine advanced coalescing technology with a proven membrane system to supply clean, dry compressed air with

From Plant process control

Avoid deposits (1st May 2006)

Avoid deposits Parker Instrumentation has developed a novel new rising-plug style valve for process instrumentation applications. A patented design provides users with a reliable valve solution for applications where contaminated media can lead to pr

From Plant process control

Oilcheck Chip sense extends engine life (1st May 2006)

To assist in extending engine operating life life and thus reduce ownership costs, Parker Hannifin has re-launched its hand-held monitor that will show when a change in engine oil condition occurs.

From Plant process control

Guide to manifolds (1st March 2006)

Parker Instrumentation has published a guide to compact double-block-and-bleed manifolds for connecting process instrumentation. The guide focuses on manifolds with flange interfaces, and on two types of integrated construction that are said to reduc

From Plant process control

Less maintenance (1st March 2006)

At this year's Power-Gen Middle East exhibition, Parker Instrumentation showed a new family of check valves specially optimised for the high temperatures and aggressive media found in turbine installations.

From Plant process control

Smarter than the average dryer (1st January 2006)

Parker Hannifin's Process Air and Gas Filtration Division says its latest Balston SMART Dryers combine coalescing technology with a proven membrane system to supply clean, dry compressed air with dewpoints as low as -40°C.

From Production engineering

Smart dryer (1st May 2005)

The Smart Dryer 5000 membrane drying system from Parker Hannifin gives a guaranteed dew point of 2°C and removes all other compressed air contaminants down to 0.01microns in size.

From Energy management

SMART dryers offer significant savings (1st May 2005)

Compressed air is regarded as the fourth utility in industry and used in many applications. It’s important that the compressed air is both clean and dry. If the compressed air supply is contaminated then there will be additional cost, with rejects, s

From Energy management

Cost savings (1st January 2005)

Parker Hannifin has launched a new filter element that is said to save users significant money in terms of energy and maintenance.

From Energy management

LARGE RANGE OF AIR FILTERS (1st March 2004)

A range of large filters has been introduced by Parker Filter Division Europe to provide cost effective protection of compressed air. Housings for the new CE range are constructed from high-grade chromatised aluminium to prevent corrosion, a tough ex

From Plant process control

Smart dryers (1st January 2004)

Parker Balstons Smart Dryer 3000 series of membrane air dryers provides pure, dry compressed air for sensitive applications that require a guaranteed 2C dewpoint and flow rates to 1019m3/h.

From Energy management

Dryer protects CMM machines (1st January 2004)

Available from Parker Balston is a new Membrane Air Dryer. It is designed to protect coordinate measurement machines (CMMs) from oil and water by providing a reliable source of pure, dry compressed air.

From Energy management

Your questions answered (1st January 2004)

Parker provides a complete range of compressed air treatment products removing the problems of oil, water and dirt from your compressed air supply. Parkers expertise ensures the correct filtration for your application here they share the answers to

From Energy management