EFD International Inc, Spinner system

ipesearch.com

Click to visit http://www.ni.com/vision/


	What next? Request further Information visit web site Send to friend EFD International Inc company's profile

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit http://air.irco.com/uk/

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Machine Building 2009

MTec 2009

Click here for the latest compressed air news !

Spinner system
November 1st 2007

EFD, a Nordson company, has introduced a Radial Spinner System that enables manufacturers to apply consistent amounts of adhesives, lubricants and other production fluids inside cylindrical parts of between 0.4 and 5in dia.

Applications range from securing engineering components to lubricating medical devices.

The system combines a compact, air-driven motor, low maintenance EFD dispense valve and EFD ValveMate controller. The valve dispenses a precisely metered amount of fluid onto a spinning disk attached to the motor. As fluid reaches the disk's edges, it spins off, forming a neat, uniform band inside the part.

More articles from EFD International Inc:

Radial spinner system (1st January 2008)

Nordson company EFD has launched a new Radial Spinner System that enables manufacturers to apply consistent amounts of adhesives, lubricants and other production fluids inside cylindrical parts between 0.4" and 5" in d

From Plant process control

Accurate dose (1st March 2007)

EFD has introduced a Radial Spinner System that enables manufacturers to apply consistent amounts of adhesives, lubricants and other production fluids inside cylindrical parts between 0.4 and 5in in diameter.

The device comb

From Plant process control

No flushing or refilling required (1st March 2007)

The EFD MicroCoat MC800 precision lubrication system will apply two different oils or other fluids on stock up to 24" wide, without lengthy downtime for flushing or refilling.

The MicroCoat system uses Low Volume Low Pressur

From Plant process control

Dispensing robot system (1st January 2007)

The tabletop Ultra TT Automation Series from EFD is a cost-effective, easily implemented dispensing robot system that is said to vastly improve productivity when making repetitive deposits of adhesives, epoxies, sealants, sol

From Production engineering

Uniform drop (1st November 2006)

By making it possible for workers to apply uniform amounts of adhesives, epoxies, lubricants and other assembly fluids, the Ultra 2400 dispensing workstation from EFD is said to increase productivity, eliminate costly rework

From Plant process control

Spot on! (1st September 2006)

The MicroMark precision spray marking system from EFD produces neat, consistent spots and stripes from 5 to 30mm wide without overspray or clogging.

From Production engineering

Uses less lube (1st July 2006)

EFD's MicroCoat MC800 stock lubrication system uses Low Volume Low Pressure technology to evenly coat stock of less than 25mm up to 1220mm wide with a fine, consistent film of oil. It prevents tool damage and reduces lube consumption by up to 70%.<br

From Plant process control

Drip-free valve (1st May 2006)

The 702V miniature dispense valve from EFD International provides uniform, drip-free application of UVcure adhesives, coatings and other fluids used in medical device assembly.

From Plant process control

Neat application (1st March 2006)

Available from EFD International, the new Ultra 1400 dispenser applies grease and other lubricants neatly and accurately.

From Plant process control

Higher output, less waste (1st January 2006)

Accurate, consistent application of cyanoacrylate makes the Ultra 2415 dispensing workstation from EFD an efficient alternative to squeeze bottles, hand syringes and other manual applicators.

From Production engineering

Precision dispense valve (1st November 2005)

The 754V-SS valve from EFD International is a precision dispense valve with an aseptic design that reduces the risk of contamination in sterile fluid filling processes.

From Production engineering

Uses less oil (1st May 2004)

EFDs MicroCoat MC800 lubrication system enables metal stampers to coat stock of less than 1in up to 48in wide with a fine, consistent film of oil. Even coverage reduces the need for tool sharpening and maintenance, while lowering oil use by as much a

From Production engineering

Piston valve (1st March 2004)

A stainless steel, pneumatically operated piston valve from EFD applies accurate, uniform dots and stripes of grease without mess, drooling or maintenance. The compact 725DA-SS has no seals to wear out, leak or degrade performance and its design is s

From Plant process control

Cut oil use by 90% (1st January 2004)

EFD claims its MicroCoat lubrication system uses low volume low pressure air to apply lubricants more efficiently than pads, rollers and airless sprays. Field reports show the systems ability to apply lubricant as a fine film, instead of a heavy spra

From Production engineering