Safely isolates (1st July 2008)

Spirax Sarco says steam and fluid systems can be upgraded quickly to allow safer, more cost-effective maintenance procedures with a space-saving SafeBloc double block and bleed (DBB3) valve.

From Health safety welfare

  Improved process control (1st July 2008)

Desuperheaters from Spirax Sarco are saving treated water and improving process control at St Regis's Wansbrough paper mill in Watchet, Somerset. The two desuperheaters reduce the steam temperature from 420°C to around

From Plant process control

  Free brochure (1st March 2008)

The free Steam System Training brochure from Spirax Sarco has details of a range of training courses for 2008. These cover all aspects of designing, operating and maintaining steam systems.

From Energy management

  Steam solution (1st January 2008)

Bandvulc Tyres has knocked 8%, (£10 000) off its energy bill by fitting a Spirax Sarco system which uses flash steam from returning condensate to preheat the feed to its boiler.

From Energy management

  Steam data (1st November 2007)

Spirax Sarco's new data sheet outlines how the company delivered one of the biggest boiler house projects in the UK, on time and on budget. The £1.4 million steam project was part of Polestar's £100 million printing facility

From Energy management

  Monitor costs (1st September 2007)

A new flow computer from Spirax Sarco provides accurate monitoring of saturated or superheated steam consumption, providing a simple and versatile way to help monitor energy costs.

From Energy management

  Guide to steam systems (1st September 2007)

The Steam and Condensate Loop is the latest guide to steam systems from Spirax Sarco. The book aims to help engineers to optimise plant operations and save energy. It explains the principles underpinning steam engineeri

From Energy management

  Steam traps (1st July 2007)

New TD62LM and TD62M thermodynamic steam taps from Spirax Sarco feature replaceable seats, allowing them to be maintained inline.

From Plant process control

  Cuts hot water costs (1st July 2007)

Two Spirax Sarco EasiHeat Engineered Systems are helping Wadworth Brewery use 8.2% less energy to heat its hot water. Replacing shell-and-tube calorifiers, the new systems have also cut maintenance at the Wiltshire-b

From Energy management

  Wasted fuel (1st May 2007)

Plant operators could be wasting thousands of pounds in fuel because their water treatment supplier is failing to monitor the phosphate levels of raw water for their steam systems. According to the European Drinking Wat

From Plant process control

  Heinz saves with steam trap survey (1st March 2007)

The site has more than 550steam traps, but there hadn't been a systematic trap survey for over five years. "We decided to have a full survey in light of our commitment to energy efficiencies and improvements," says the site's

From Energy management

  Valve update (1st January 2007)

The Spirax Sarco SV615 range of safety valves for over pressure protection in steam, gas and liquid applications has been upgraded to achieve higher setting accuracy and reliability.

The valves are set and sealed to the cust

From Plant process control

  Cut energy bills by 10% (1st January 2007)

Metercom II monitoring software, from Spirax Sarco, aims to help companies save energy by applying more effective Monitoring & targeting (M&T) / Effective M&T can cut energy bills by at least 10% through simple good house kee

From Energy management

  Helps maintain ful steam ahead (1st January 2007)

At Maintec 2007, Spirax Sarco will present its portfolio of maintenance services for steam systems. As no two steam systems are identical, Spirax Sarco tailors its range of services to match each site's needs. Services span t

From Plant process control

  Condensate recovery (1st November 2006)

Spirax Sarco has launched an energy efficient packaged condensate recovery system that can help steam plant operators reduce energy costs. The Ci-Nergy (Compact intelligent Energy Recovery Unit) is a complete, fully assembled

From Energy management

  94% pass boas course (1st September 2006)

Spirax Sarco has held four Boiler Operative Accreditation Scheme courses so far and candidates have achieved a 94% pass rate.

From Plant process control

  High capacity pump trap (1st September 2006)

Spirax Sarco has launched a high capacity version of its APT14 automatic pump trap (APT14HC).

From Plant process control

  1.4m steam system (1st September 2006)

Spirax Sarco has provided a 1.4m turnkey steam system as part of Polestar's 100m project to build in Sheffield what it believes is Europe's largest gravure printworks.

From Energy management

  Space-saving solution for plant room (1st September 2006)

Using Spirax Sarco EasiHeat engineered systems to provide hot water and heating has saved plant room space and reduced installation time during a major refurbishment project run by Hiltons of Nottingham.

From Premises management maintenance

  Traps pay (1st May 2006)

Spirax Sarco steam trap surveys are highlighting energy and maintenance savings that are achieving paybacks of less than four months at a chemicals producer in Warrington. The first survey at the site also revealed a 50% failure rate for fixed orifac

From Energy management

  Getting in hot water (1st May 2006)

Energy costs have been reduced at Tate and Lyle with the aid of an Easiheat Engineered System, from Spirax Sarco .

From Energy management

  Do the boiler house walkabout and save energy (1st March 2006)

A simple check of your boiler house could lead to improvements in efficiency as well as maintaining effective system operation

From Energy management

  Boiler training (1st March 2006)

Spirax Sarco has become a fully approved training provider for the new, nationally-recognised Boiler Operative Accreditation Scheme (BOAS) qualification for industrial boiler operators.

From Plant process control

  Cost saving (1st January 2006)

Quickfit steam traps from Spirax Sarco have helped reduce the impact of trap failure and subsequent maintenance costs for Acetate Products' first set of production lines, encouraging the company to standardise on them for Filter tow production lines

From Premises management maintenance

  Flash steam recovery saver (1st January 2006)

A Spirax Sarco flash steam recovery system is delivering savings of 20% at meat and poultry residue processor, De Mulder & sons, in Nuneaton.

From Energy management

  Smart Unit (1st January 2006)

The SP300 smart positioner from Spirax Sarco offers extensive digital communications capabilities enabling it to be used in a wide variety of process automation environments. It is compatible with HART, Profibus PAS and Foundation Fieldbus protocols.

From Plant process control

  Automatic pump (1st November 2005)

The latest MFP14 automatic mechanical pumps from Spirax Sarco offer an extended three year mechanical warranty for all applications, irrespective of how high the pumping load.

From Production engineering

  CLEAN STEAM VALVE (1st September 2005)

The Steri-Trol clean service control valve is the latest addition to Spirax Sarco’s family of steam controls. The two-port, pneumatically-actuated valve complies with all relevant standards to suit a range of hygienic steam applications in demanding

From Plant process control

  Clean steam (1st July 2005)

Spirax Sarco’s new clean steam generators produce up to 580kg/h of clean steam in a compact package that saves plantroom space.

From Production engineering

  Saving energy (1st July 2005)

Spirax Sarco engineered systems have helped cut utility consumption by 20% at GlaxoSmithKline’s Barnard Castle factory.

From Energy management

  INJECTOR BRINGS QUIET EFFICIENCY (1st May 2005)

Spirax Sarco has solved a noise problem and overcome shortages of sterilisation steam by installing a steam injector in the boiler feedtank at Heveco Mushrooms in West Sussex. The injector is also cutting the consumption of water treatment chemicals

From Plant process control

EVEN MORE RESILIENT (1st March 2005)

An updated version of its DP17 steam pressure control valve has been launched by Spirax Sarco.

From News

  Accurate control of rocket fuel (1st March 2005)

For the last three years, Spirax Sarco electrically actuated valves have been providing accurate temperature control for processing solid rocket propellant at Roxel UK in Kidderminster.

From Plant process control

  SPRING BOOST FOR VALVE (1st January 2005)

Pilot operated pressure reducing valves from Spirax Sarco have been upgraded with the introduction of a hi-tech, variable rate, pressure control spring. The result, says the company, is simplified ordering and a cut in spares stockholding costs.

From Plant process control

  Latest steam trap (1st January 2005)

Spirax Sarco’s FT ball float series has been extended with the addition of the FTGS14 version.

From Plant process control

  Design & supply (1st November 2004)

Spirax Sarco’s involvement in the design and supply of a complex hot water control system has helped Pirelli meet a tight deadline for expanding tyre production at its European Centre of Excellence for Sports Utility Vehicle (SUV) Tyres, Carlisle.

From Plant process control

  Bellows sealed (1st September 2004)

Two new PN40 flanged bellows sealed valves from Spirax Sarco offer low maintenance costs for hygienic applications that demand non-corrosive equipment.

From Plant process control

  COOLING CONTROLS BOOST EFFICIENCY (1st September 2004)

Three Spirax Sarco pneumatically-actuated control valves fitted with smart positioners are helping to boost productivity at a steel section mill near Cardiff.

From Plant process control

  FUEL SAVINGS (1st July 2004)

Two Spirax Sarco EasiHeat Engineered Systems have replaced a single large hot water boiler to provide space heating at the LOreal factory in Wales. Each unit is rated at half the capacity of the old boiler, yet is so efficient that only one has been

From Energy management

  Course news (1st July 2004)

Spirax Sarcos BTEC courses have been upgraded from BTEC Awards to BTEC Certificates and now place greater emphasis on continuous assessment and less on end-of-course testing.

From Plant process control

  ATEX APPROVAL (1st May 2004)

Mechanical Fluid Pumps and Automatic Pump Traps from Spirax Sarco are certified as complying with the atex Directive 94/9/EC.

From Plant process control

  Clean steam (1st March 2004)

Spirax Sarco has introduced a compact clean steam generator range for hospital sterilisation and smaller industrial applications, such as cleanroom humidification, direct injection and cleaning-in-place in the food and drinks and pharmaceuticals indu

From Energy management

  Energy savings or money back (1st January 2004)

A new Spirax Sarco training course comes with a money back guarantee if energy savings equal to double the cost of the course are not achieved within one year.

From Energy management

  All-in-one trap (1st January 2004)

An all-in one steam trap station that helps cut installation and maintenance costs and simplifies the selection of components, has been introduced by Spirax Sarco. The STS17 is a complete welded assembly comprising isolation valves, steam trap connec

From Plant process control

  Slow opening valve brings fast savings (1st November 2003)

An automatic slow opening valve from Spirax Sarco has helped textile dyer Bulmer & Lumb halve the cost of steam used for processing and space heating at its Bradford site. Fitted on the output from the sites two boilers, rated at 16 000 and 4500kg/h

From Plant process control

  Free to steam ahead (1st September 2003)

A free online training programme from Spirax Sarco enables engineers to cover vital topics on the design and maintenance of steam systems in just 30min. The distance learning website requires no log-in or registration, making it quick and easy to acc

From Plant process control