Articles about this company:
Insert and pin installation (1st March 2012)
The correct application of Spirol Industries' technology solutions for cost-effective pin and insert installations will allow users to provide lower cost, more reliable assemblies which can be delivered faster. Both sem
From Production engineering
Hole solution (1st March 2011)
A standard off-the-shelf Dowel Bushing from Spirol Industries has been specified to replace two solid ground wall dowels used to align the two side covers of the body of an oil pump assembly. The solution has reduced th
Stainless steel disc springs in two types (1st May 2010)
Spirol Industries now offers stainless steel versions of its Disc Springs. Although stainless steel is not part of the DIN 2093 standard, all the disc springs produced by Spirol are controlled to that exacting level.
Springs added (1st March 2010)
Spirol Industries has extended its range of disc springs with the addition of new stainless steel versions. Although stainless steel is not part of the DIN 2093 standard, all disc springs produced by Spirol are controll
Coiled spring pins prove positive for pumps (1st November 2009)
The automotive industry traditionally uses machined solid dowels to align various engine components to the block. In an effort to reduce cost, assembly weight and installation forces, a manufacturer approached Spirol
Production enhanced (1st July 2009)
A manufacturer of moulded plastic electrical conduit components was previously installing brass inserts into products using a single horn ultrasonic welder. This time consuming task was frequently problematical due to
Plastic inserts (1st May 2009)
During any engineering assembly process, plastic inserts can provide secure, tight threaded joints.
Fastening guide (1st January 2008)
Spirol Industries provides a range of engineering products and services designed to ensure customers achieve the optimum fastening solution for their assembly at the lowest cost.
Springing a solution (1st November 2007)
Use of standard duty coiled pins as hinge pins in a circular saw blade guard application was causing problems during manufacture due to excessively high insertion forces.
Special pin design (1st September 2007)
To solve a problem faced by a manufacturer of diesel fuel injection assemblies, Spirol has developed a special helical grooved pin.
From Plant process control
Latch pins (1st May 2007)
Spirol Industries has introduced a range of Latch Pins which have been designed for larger plastic hinge applications.
Guide to solid pins (1st November 2006)
Spirol Industries has introduced a new Guide to Solid Pins. It provides design and application information on the company's range of standard solid pins and predesigned special helical grooved pins. Details of customised pin
Self-tapping (1st July 2006)
A self-tapping range of inserts is available from Spirol for use with most plastics, including thermosets, providing a high and consistent pull-out strength.
More spacers (1st May 2006)
The Spirol range of spacers is produced from strip metal into rolled formed tubes. The range is available in both low carbon steel and aluminium in sizes from 3 to 24mm ID. Both standard and heavy duty wall versions are available.
Spring pins (1st March 2006)
Spirol Industries believes its range of metric and imperial standard coiled spring pins to be the widest available from any supplier in terms of size and material.
Disc springs (1st January 2006)
Spirol Industries believes the Bissell disc spring range to be one of the most comprehensive in terms of standard and special ranges, sizes, potential applications and materials.
Coiled spring PIN additions (1st November 2005)
Additions have been made to both the metric and imperial standard coiled spring pins available from Spirol Industries.
New guide (1st September 2005)
High Performance Solutions for Automotive Applications is a new guide from Spirol Industries. It details the vast number of potential applications for the company’s products throughout a typical vehicle. These range from safety critical assemblies su
COMPACTS PIN DOWN COSTS (1st November 2004)
Coil pins from Spirol Industries have been specified for the hinges of a new line of cosmetic compacts to help reduce costs.
MORE EXPANSION INSERTS (1st September 2004)
Literature is available from Spirol Industries on its latest line of expansion inserts. These are intended for strengthening plastic joints.
