Pay as you sense proves popular (1st January 2012)

Equipment rentals are increasingly helping companies overcome the hurdle of finding investment capital to fund new development and verification projects.

From Plant process control

Providing all the information needed to optimise efficiency (2nd November 2011)

Sensor Technology introduces the new wireless LoadSense load cell. LoadSense provides all the information needed to optimise efficiency and increase profitability of a wide range of industrial operations.

From Newsletter Stories

  Smart sensor (1st January 2011)

A smart load sensor developed in the UK by Sensor Technology allows weighing processes to be integrated with handling operations.

From Handling storing

  Sensors aid tidal turbine development (1st September 2010)

Non-contact torque sensors from Sensor Technology are used in the development of commercial-scale in-stream tidal turbines produced by OpenHydro.

From Plant process control

  Looking into lava (1st March 2010)

The secrets of climate change and the formation of giant lava deposits on Mars may soon be revealed to a team investigating lava flows from Mount Etna, using sensing technology developed for industrial use.

From Plant process control

  Real-time control: Food for thought (1st May 2009)

Real time process control for food manufacture has come a step closer, following research at University College Dublin into viscosity measurement techniques for characterising the flow and mixability of highly non-Newtoni

From Plant process control

When two is better than one (21st February 2008)

New for 2008 is TorqSense RWT 330/340series, designed for use in

From Newsletter Stories

When two is better than one (1st February 2008)

Sensor Technology, the company that developed practical non-contact torque measurement, will once again unveil a major innovation at the MTEC Exhibition. New for 2008 is TorqSense RWT 330/340series, designed for use in applications where space is limited, and provides non-contact measurement of torque, speed, power and position of rotating shafts, such as machine drives, drive shafts for pumps, fans, mixers etc, and in the critical axes of test rigs...

From Newsletter Stories

  For torque measurement in small spaces (1st January 2008)

A new development will be unveiled by Sensor Technology at MTEC. The TorqSense RWT 330/340 series is designed for use in applications where space is limited.

From Plant process control

  Non-contact digital torque sensor (1st September 2007)

Development of a vertical take-off and landing unmanned aerial vehicle is nearing completion, thanks in part to a non-contact digital torque sensor, TorqSense.

From Plant process control

  Calculating torque (1st July 2007)

Replacing a torque meter with a torque sensor has significantly changed the validating process for bespoke Fireset sprinkler systems built by Grundfos Pumps. Huw Lloyd, engineering manager, explains the company turne

From Plant process control

  Vacuum seals tested but not touched (1st March 2007)

A non-contact torque monitoring system from Sensor Technology, that guarantees lightness of touch has proven the best way to test the seals of super high performance vacuum systems. With over thirty years experience of produ

From Plant process control

  Precise, yet simple torque (1st January 2007)

Total solutions for non contact measurement can be seen on Sensor Technology's stand at the 2007 M-Tec exhibition. The RWT310/320 series of Torqsense Rotary Torque sensors is now available from 1Nm to 10,000Nm, so can be appl

From Plant process control

  Awards for torque sensors (1st September 2006)

Sensor Technology has picked up two overseas awards this year for its new digital TorqSense RWT310/320 series non-contact torque monitoring transducer.

From Plant process control

  Torque sensor (1st January 2006)

Sensor Technology will be displaying on its MTEC stand its complete range of TorqSense transducers and TorqView2, a complementary software programme that generates a visual instrumentation display of the TorqSense output.

From Production engineering

  IT’S PLUG-&-GO FOR TORQUE TRANSDUCER (1st September 2005)

A dynamometer for testing 180 motors/hour for vehicle electrohydraulic powerassisted steering, uses a non-contact torque transducer from Sensor Technology for ensuring accuracy of readings.

From Production engineering

  Testing time for jet (1st July 2005)

Development and qualification testing of three flap system actuators for the new Falcon 7X business jet is performed on a test rig designed and built by Comar Engineering. It incorporates non-contact torque transducers from Sensor Technology.

From Plant process control

  Revolutionise (1st September 2004)

Sensor Technology will show its new RWT-310 and RWT-320 Torqsense rotary torque encoders at the Drives & Control Exhibition.

From Production engineering

  Its good to Torqsense (1st March 2004)

Surface Acoustic Waves, first observed by the Victorian gentleman-scientist Lord Raleigh when he was caught in an earthquake, are about to make some radical changes to 21st Century machine design and control engineering. They are the key to a new low

From Plant process control