Articles about this company:
Pump copes with abrasive mixture (1st March 2012)
Using conventional metering pumps to dispense controlled amounts of a special sand and resin mixture into moulds was proving difficult for a manufacturer of ceramic shower trays. Due to the abrasive nature of the mixt
From Plant process control
Armour plated (1st January 2012)
Available from Michael Smith Engineers, the White Ink pump joins its Micropump range. The modified GJ series Micropump was originally designed for ink jet applications and copes with titanium pigmented inks, (those cont
Corrosion resistant (1st November 2011)
Offering high degrees of resistance to both wear and chemical attack, the HNP 11558 micro annular gear pump has been added to the established range of HNP MZR internal gear pumps. Available from pumping specialists Mich
Tough and easy-to-maintain (1st November 2011)
Viking Universal Seal Pumps are designed to meet the demands of heavy-duty, industrial pumping applications and incorporate features for reliable, low-maintenance pumping, even in the most challenging environments.
Sealless pumps help solve sticky situation (1st September 2011)
Pumping resinous glue at high temperatures presents a sticky problem for certain types of pump, especially when there is an added complication of the glue containing particulates.
Sealless benefits (1st September 2011)
A new pump model DB5.5 has been added to the established range of Finish Thompson DB Series of Plastic Magnetic- Drive Sealless Centrifugal pumps.
Meeting the challenge of ultrasonic cleaning (1st July 2011)
AFinish Thompson centrifugal pump is withstanding the rigorous conditions found in ultrasonic cleaning machines, including the need to transfer volatile, near boiling solvents. The pump was supplied to Guyson Internati
Mag-drive pump (1st July 2011)
A magnetically driven micro annular gear pump, which is suited to handling liquids in critical metering applications where reliable, leak-free pumping is essential, has been introduced by Michael Smith Engineers. The ul
Stainless steel drum emptying pump (1st May 2011)
The latest addition to the Finish Thompson range of drum emptying pumps, the EFS Series pump in stainless steel is suitable for pumping corrosive chemicals, light oils, caustic cleaners, solvents and other challenging l
Direct-acting (1st January 2011)
Eaton Corporation has introduced new direct-acting, poppet style, relief valves. The vickers valves provide a compact and cost-effective solution for handling high pressure and flow requirements in primary metal, press
More self-priming mag-drive pumps (1st January 2011)
The Finish Thompson SP series of magnetic drive, self-priming centrifugal pumps has been extended with the addition of two new models. This is said to result in a significantly increased performance envelope across the r
Electric drum pump (1st November 2010)
Transferring liquids, such as oils, acids and detergents from small drums, buckets and carboys is often done manually – and even if correct procedures are followed, this can be a time-consuming and messy process.
Gear pumps for high viscosity fluids (1st November 2010)
Pump specialist Michael Smith Engineers, has introduced a range of high performance external gear pumps, which is said to deliver virtually pulseless flows. Suitable for pumping high viscosity fluids at higher temperatu
Heavy duty pumps (1st September 2010)
Heavy duty canned motor pumps, designed to be compliant with the American Petroleum Industry specification API 685 for sealless centrifugal pumps, are now available through Michael Smith Engineers.
Working 24/7 (1st July 2010)
Michael Smith Engineers has supplied six Nikkiso canned motor pumps to Star Refrigeration for a freeze-drying plant for a food manufacturer. They operate as part of the process of manufacturing instant coffee and were c
Hooked on plastic pumps (1st May 2010)
When Finish Thompson ETHYLENE COOL needed a demanding site to test its DB Series of plastic magnet-drive centrifugal pumps,Wright McGill, manufacturer of the Eagle Claw Fishing Tackle brand was happy to oblige.
New gear pump motor options (1st March 2010)
The established range of HNP positive displacement, internal gear pumps has been expanded to include new, larger pumps and more drive options to suit a wider range of applications. Available from pump specialists Michae
Greater choice (1st January 2010)
The range of simple, yet reliable Viking external gear pumps has been extended and now features 29 models to provide flows from 0.2 to 760L/min.
For aggressive liquids (1st September 2009)
Liquiflo has developed a range of magnetically-driven PFA lined gear pumps to safely transfer aggressive liquids, such as inorganic acids, bases and salts.
Pump motors (1st July 2009)
A 650W motor which produces a maximum10,000 rpm speed for excellent flow and head capabilities is one of the new motor options recently introduced for the Finish Thompson range of portable drum and barrel emptying pumps
Canned motor pumps help to cut costs (1st March 2009)
To reduce maintenance costs and cut energy bills, DSM Composite Resins in Ellesmere Port decided in 2006 to replace ageing magnetically coupled pumps operating on Jarytherm hot oil service, operating at 250°C. Pumps w
Easy upgrade to sealless pumping (1st January 2009)
The latest addition to the Viking range of internal gear pumps is an interchangeable, sealless model for pumping hazardous, hard-to-seal liquids, or for applications where very low maintenance is important.
Leak-free pumps (1st March 2008)
Plastic, magnet-driven centrifugal pumps for use in the most corrosive and challenging environments have been introduced by Michael Smith Engineers.
Stainless steel vane pumps (1st March 2008)
Where reliability and durability are high priorities when choosing a pump for transferring corrosive or thin liquids at higher pressures, Viking LVP stainless steel vane pumps from Michael Smith Engineers, offer a solu
Pump for aggressive fluids (1st July 2007)
Portable drum and barrel emptying pumps are a simple and effective device for transferring a wide range of fluids from tanks, drums, barrels and IBCs. Michael Smith Engineers has recently added a new lower cost option t
Keep pumping not waiting (1st July 2007)
Described as powerful, fast, economical and versatile, the new Finish Thompson SP series magnetic drive, self-priming centrifugal pumps are available through Michael Smith Engineers.
Built for long life (1st January 2007)
Available through Michael Smith Engineers, Hydra-Cell sealless positive displacement pumps are designed for long life even in the most arduous of conditions. Suitable for use in clean, dirty, hot, high pressure, low pressure
Resists corrosives (1st November 2006)
The new Finnish Thompson DB series of sealless, plastic magnetic drive centrifugal pumps are designed to withstand the effects of corrosive fluids. Available through Michael Smith Engineers, the pumps are said to promise out
Leak-free for hot oil (1st September 2006)
A magnetically coupled centrifugal pump from Michael Smith Engineers offers sealless design combined with a hermetically sealed liquid end to give zero leakage.
Non-metallic pump (1st July 2006)
The latest industrial gear pumps from Michael Smith Engineers are said to offer excellent corrosion resistance and optimum reliability due to their simplified design and the use of tough, non-metallic materials for all wetted parts.
Resists corrosives (1st May 2006)
Ultrachem pumps are designed to transfer aggressive fluids in tough chemical process applications. The ANSI dimensional, magnetically driven pumps are made from a tough ductile iron casing with a Tefzel (ETFE) lining that is said to provide optimum c
Solution to Delicate Matter (1st March 2006)
The latest addition to the Ismatec range of tubing pumps is the compact and durable Ecoflow unit that provides low-cost, yet effective liquids transfer of delicate media in OEM, pharmaceutical, biotechnology and other similar critical applications.
Pulse-free dispensing (1st November 2005)
A pulse-free dispensing pump from Michael Smith Engineers is said to offer excellent repeatability on a wide range of flows. The Reglo Z is a compact, digital drive unit for use with the Micropump range of magnetically coupled gear pump heads.
From Production engineering
Art of pumping (1st September 2005)
The art of pumping thick, viscous fluids such as pastes, gels, syrups, oils and greases from barrels and drums quickly and efficiently depends on a high performance drum pump, according to Finish Thompson, a company that recently developed such a pum
Leak-free (1st July 2005)
The self-contained, leak-free range of Nikkiso canned motor pumps has been extended with the introduction of the HK Series, a high head, high speed version of the sealless centrifugal pumps.
MULTI-CHANNEL PUMPS (1st May 2005)
Available from Michael Smith Engineers, Ismatec’s multi-channel tubing pumps have 4, 8, 12 or 24 channels and deliver from 0.002mL to 44mL/min per channel.
LESS STRESS WHEN PUMPING (1st March 2005)
Areas of potential concentrated or localised stress on Codip airoperated pumps are said to have been eliminated due to the design and operation of the pump’s PTFE tubular diaphragm mechanism.
SMALL PUMP; BIG PERFORMANCE (1st January 2005)
A better performance from an even smaller pump is the claim made for the latest addition to the range of Micropump Gear Pump options available from Michael Smith Engineers.
More drive options (1st September 2004)
Introduction of a metric motor adaptor for the FMI range of dispensers and metering pumps from Michael Smith Engineers means a significant increase in the drive options for FMI pump heads.
For solvents (1st July 2004)
The Liquiflo 33 series magnetically coupled gear pump from Michael Smith Engineers pumps solvent based products with viscosities from 0.2 to 10cps.
Piston pump range (1st March 2004)
Durability and high accuracy are among the benefits claimed for the new range of FMI dispensers and piston pumps available from Michael Smith Engineers. Seven pump sizes are offered, covering flow rates from microlitres to 4600ml/min at discharge pre
SMOOTH, NON-PULSATING FLOWS (1st January 2004)
A high viscosity drum pump driven by an 800W motor has been introduced by Michael Smith Engineers to provide optimum pumping performance with smooth, non-pulsating flows. The Finish Thompson HVDP is a positive displacement pump with a progressive cav
