Articles about this company:
MecWash cleans up (1st March 2012)
Environmentally friendly component cleaning and waste-water management are both being highlighted on the MecWash Systems/Aqua- Save Technologies stand at this year's MACH exhibition.
From Production engineering
Aqueous-based cleaning station (1st July 2011)
Manufacturer of defence electronic systems, SELEX Galileo is reported to have enhanced its UK operational and environmental performance with the installation of an aqueousbased component cleaning statio from MecWash Sys
Aqueous component cleaning (1st January 2011)
Specialist manufacturer, SPS Technologies, has installed a second aqueous-based component cleaning system from MecWash Systems specifically to meet the cleaning requirements of a new customer.
Export market success (1st November 2010)
Specialist component cleaning company,MecWash Systems is reporting its most successful year ever in export markets – a reflection, it says, of the suitability of its equipment to meet the growing international emphasis
Clean and green (1st July 2010)
Aqueous cleaning of components can deliver excellent results, has advantages for the operator and demonstrates environmental responsibility, according to John Pattison, managing director of MecWash Systems
The costs come out in the wash (1st May 2010)
The Nottingham premises of APPH, part of the BBA Aviation Group, which produces hydraulic systems, has taken steps to enhance its machining waste water disposal procedures by installing a single processing unit from Aqu
Aqueous cleaning technologies (1st May 2010)
Aqueous-based component cleaning specialist,MecWash Systems and its wastewater treatment division, Aqua-Save Technologies will be showing latest developments.
Aqueous cleaning helps meet SED obligations (1st March 2010)
Production of specialist aircraft components requires the highest level of cleanliness and, at Meggitt Aircraft Braking Systems, this requirement is met by aqueous cleaning technology from MecWash Systems.
A winner down under (1st January 2010)
The benefits of component cleaning using aqueousbased technology from MecWash Systems, in the context of Trichloroethylene (TCE) replacement, have been recognised with a national award in Australia.
Waste water recycling unit (1st September 2009)
Off-site disposal of waste water has been reduced from a collection every four to six weeks to, potentially, one every two years as the result of using a single Aqua-Save waste water recycling system installed at an en
From Energy management
New aqueous component cleaning system (1st September 2009)
It is reported that high quality component cleaning and drying, coupled with enhanced environmental performance, is now being enjoyed at Picross Precision Engineering Co thanks to the new MecWash Duo component cleanin
For waste water (1st July 2009)
Environmental improvements and cost savings at hydraulic tube manufacturer, Iracroft, in Dorset follow the installation of two Aqua- Save waste water treatment units from MecWash Systems.
Aqueous component cleaning (1st March 2009)
Providing high performance, aqueous-based cleaning, four MecWash installations are a key element in the drive to replace solvent use at the Goodrich Actuation Systems plant in Wolverhampton.
No solvent degrease (1st March 2009)
High performance, aqueous-based cleaning and enhanced environmental protection are at the heart of four MecWash installations now operational at the Goodrich Actuation Systems plant in Wolverhampton. The MecWash Midi u
Water re-use optimised for parts producer (1st September 2008)
An Aqua-Save Junior – the smallest waste water recycling unit from specialist manufacturer, Aqua-Save Technologies – is now a key processing focal point at H S Rowe and Partners. The producer of subcontracted turned pa
Regulations and wastewater (1st September 2008)
may not understand the wastewater issue and do not have a grasp of either relevant regulations or, indeed, of how to resolve the considerations that may arise.
Versatility for turned component manufacturer (1st July 2008)
Component cleaning systems from MecWash combined with the environmental water recycling capability of sister company Aqua- Save Technologies is delivering benefits to CNC precision turning component company, Qualiturn.
Waste disposal costs slashed (1st September 2007)
A waste water recycling unit from MecWash Systems (Aqua-Save Technologies division) is set to save Weymouth-based Universal Engineering Company (Charlstown) more than £5000 per year by virtually eradicating the amount
No drain connection needed (1st July 2007)
Aqueous-based component cleaning technology from MecWash Systems is now meeting the high performance standards laid down by one of the world's leading manufacturers of measurement equipment.
Waste water: recover, re-use and save (27th July 2006)
MecWash's Aqua Save units recover and re-use industrial waste water so that only the remaining 5% of concentrated oily waste needs environmentally safe disposal, helping environmental compliance – and saving firms money.
From Newsletter Stories
Recover and reuse waste water (1st July 2006)
A major step forward in industrial waste water disposal from both a production process and environmental points of view can now be gained from the creation of a new operating division of specialist component washing system manufacturer MecWash Syst
Aqueous cleaning (1st March 2006)
Thanks to MecWash Systems' aqueous cleaning technology, turned parts manufacturer MSP is enjoying a 75% reduction in component cleaning time and more consistent product quality.
Dedicated Jetting (1st January 2006)
Dedicated jetting technology has now been extended to the smallest unit in MecWash Systems' range - the Solo 400.
From In depth report
Two systems in one (1st November 2005)
MecWash Systems' rotational washing system is now available with ultrasonic cleaning built in to the same unit to provide high levels of component cleaning.
Combining ultrasonics with aqueous wash system (1st July 2005)
Ahigh level of component cleaning is achieved by Hydraforce in Birmingham following installation of a MecWash Midi wash system that combines rotational washing technology with ultrasonics.
From Premises management maintenance
Aqueous wash (1st March 2005)
Four component cleaning stations have been installed by MecWash Systems at Cosworth Technology’s new facility that is dedicated to the production of non roadgoing engines.
Triumph for aqueous cleaning machines (1st July 2004)
The new Triumph Rocket III motorcycle, at almost 2.3l, is believed to be the most powerful production bike in the world. Its introduction is a reflection of the commitment by the company to achieving the highest levels of manufacturing quality. That
Stand-alone (1st March 2004)
The MecWash stand at this years MACH exhibition will highlight the companys stand-alone component cleaning stations, including an integral jetting capability that is said to enable the user to benefit from the ultimate high speed wash. Allied to this
Recycle your wash solution (1st September 2003)
With environmental legislation bringing cost increases to manufacturers IP&E finds out how to keep costs down when cleaning components With waste costing UK industry 15 billion per year, meeting the highest environmental standards throughout engine
