Articles about this company:
Furnace assists with research project (1st November 2011)
The Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden is using a Carbolite furnace to research debinding and sintering of ceramics as part of in-depth investigations into the application benefit
From Production engineering
Rapid implementation of customised furnace (1st September 2011)
A new manufacturing process at its Gloucester production facility meant the abrasives division of a manufacturer of advanced ceramic materials needed to replace large raised hearth furnaces that had reached the end
From Plant process control
Custom oven meets capacity challenge (1st July 2011)
When a blue chip aero-space manufacturer's paint and coatings plant in Bristol needed to expand capacity, it soon realised that its Carbolite ovens were not large enough to meet the increased output.
Tube furnaces (1st May 2011)
Carbolite has supplied Fraunhofer Institute for Physical Measurement Techniques in Germany with a test rig that comprises two customised wire wound horizontal three-zone tube furnaces. These will provide the Institute w
Testing role for furnaces (1st November 2008)
Five specially designed Carbolite furnaces are enabling Vibro-Meter UK to perform long-term thermal test programmes that simulate conditions experienced by thermocouples in gas turbine aero-engines.
MAT furnaces (1st January 2007)
The latest furnaces to be introduced by Carbolite combine radiant and microwave heating which, the company says, produces faster processing rates than both radiant-only and microwave-only systems. The result is reduced energ
Ovens raise production capacity and quality (1st November 2006)
Two high-specification Carbolite ovens have been installed by specialist sealing solution provider Greene Tweed to increase the capacity and consistency of the raw material sintering operation at its UK manufacturing facility
Ovens boost production capacity (1st September 2006)
Two high specification Carbolite ovens have been installed by specialist sealing solution provider Greene, Tweed and Co to increase the capacity and consistency of the raw material sintering operation at its UK manufacturing
Maintaining an even temper (1st March 2006)
Carbolite, specialist manufacturers of electric furnaces, has completed the installation of custom-built equipment for Dormer tools. The equipment has been commissioned for tempering highspeed- steel drill blanks in a continuous process without inter
Three Custombuilt Furnaces (1st January 2006)
Installation of three custombuilt furnaces from Carbolite has upgraded production facilities for e2v technologies, manufacturer of radio frequency, microwave and sensing components.
New furnaces (1st July 2004)
The Rolls Wood Group has increased its heat treatment capabilities with the addition of two special electric furnaces from Carbolite. They will be used for accurate controlled diffusion and solution heat treatment of turbine blades and nozzle guide v
furnaces help the ageing process (1st November 2003)
Two custom-built Carbolite furnaces with provision for protective atmospheres are providing Howmet Exeter Castings with precisely controlled facilities for heat-treating industrial gas turbine blades. The furnaces are used for long-term ageing of com
