Membrane dryers in the spotlight (1st March 2012)

The benefits of desiccant dryers and refrigeration dryers are well publicised. There is a third solution, however, that Steve Riley, general manager of Beko Technologies in the UK and Ireland, believes is often ignored or

From Plant process control

  Catalytic converter (1st January 2012)

Beko Technologies introduced the Bekokat catalytic converter in 2008 realising that there would not be a flood of sales, but expecting to see a slow uptake of the product by companies who need 100% oil-free or better th

From Plant process control

  Many measuring modes (1st September 2011)

For two years BEKO Technologies has been selling its Metpoint OCV for the regular in-line monitoring of residual hydrocarbon vapour in compressed air streams. In response to requests for a means of measuring multiple po

From Plant process control

  Flow meters (1st September 2011)

Thanks to an affordable price point, BEKO says that with its new METPOINT FLM compact flow meter devices more locations can be monitored. The devices measure flow, total consumption and velocity.

From Plant process control

  Filter range (1st July 2011)

BEKO Technologies has an upgraded version of its Clearpoint filter range.

From Plant process control

  Moving forward with 'big' ideas (1st May 2011)

The setting up of BEKO Systems was important to the BEKO group because it gives the company capability in very large dryers. The Everdry range of heat regenerated adsorption dryers extends to 20,000m3/h and the company

From Energy management

  New expansion (1st March 2011)

BEKO Technologies UK has completed the expansion of its site in Bromsgrove,Worcestershire.

From Plant process control

  Measuring the ageing process (1st November 2010)

The days of estimated and approximate values will soon be over as far as desiccant management in compressed air processing is concerned, according to Horst Singer of Beko Technologies.Here, he outlines a new test method th

From Plant process control

  TÜV-certified (1st July 2010)

In 2009 Beko Technologies launched an oil-vapour measuring device within the scope of the Metpoint measurement technology product range – Metpoint OCV.

From Plant process control

  Savings calculator (1st May 2010)

BEKO has made a calculator available on its website to show the potential savings that can be achieved by fitting a BEKOMAT zero air-loss drain.

From Plant process control

  Free compressor check (1st May 2010)

Beko offers a wide range of oil/water separators and condensate drains to help companies meet their legal obligations, including the Water Resources Act 1991.

From Plant process control

  Checks for oil (1st January 2010)

Even ‘oil-free’ components and compressors are no guarantor for ‘oil-free’ compressed air due to impurities in the ambient air/intake air

From Plant process control

  Sweet success (1st November 2009)

Compressed air for the pneumatic handling of cereals, cocoa powder and other matter in the Alfred Ritter chocolate plant has to be in accordance with the requirements of HACCP. Preventing clumping in conveyor pipes, and

From Plant process control

  Learn about air (1st July 2009)

Beko has launched its first e-learning course – The Basics of Compressed Air Technology – which will be available to all customers. The course gives an insight into compressed air from the user's point of view and provid

From Plant process control

  Debut for drain (1st May 2009)

The Bekomat 33 condensate drain was presented for the first time at this year's Hannover trade fair, joining versions 31 and 32 that were launched two years ago.

From Energy management

  Checking compressed air is really oil free (1st November 2008)

BEKO Technologies has launched OILCONTROL – a new tool to aid checking compressed air quality.

From Plant process control

  Versatile dryers (1st March 2008)

The Everdry series of dryers from Beko Technologies offers standard and bespoke solutions. The basis of the range is different standardised portfolios of heat-regenerated adsorption dryers.

From Plant process control

  How to separate the water from the oil (1st March 2008)

BEKO Technologies will show recently launched products, Oil Control, Medbac and Drypoint dryers.

From Plant process control

  Filter elements (1st November 2007)

The energy costs of compressed air filtration are significantly influenced by the pressure drop. In order to maintain the required operating pressure, the compressor performance has to be stepped up to compensate for the pres

From Plant process control

  A catalytic converter for pure compressed air (1st November 2007)

Compressed-air processing at its finest: absolutely oil-free and dry, compressed-air class 1 and better. Produced in a single process step subsequent to compression. Bekokat, the catalysis method for compressed-air processing by Beko Technologies, claims to make it possible

From Energy management

  Catalyst for oil free air (1st January 2007)

BEKO says its new catalyst system delivers a constant supply of oil-free compressed air with a barely detectable max residual oil content of 0.003 milligram per cubic metre. As such, the BEKOKAT devices sail past the stringe

From Plant process control

  Flowmeter for precise air measurements (1st January 2006)

Beko has launched the Flowmeter to enable greater precision of flow rate and consumption measurements in compressed air systems. The thermal mass flow meter strategically collects measuring data, providing a sound basis for plant optimisation, accord

From Production engineering

  Four birds with one stone (1st January 2006)

Experts estimate that a great many of the compressors used in compressed air systems could really be dispensed with because they only run to make up for the unnecessary loss of air and pressure. Moreover, effective compressed air controlling would en

From Production engineering

  Refrigeration dryer range extended (1st September 2005)

At COMVAC 2005 Beko Technologies introduced the latest addition to its refrigeration dryer range - the Drypoint RA.

From Energy management

  EFFICIENT AND ECONOMICAL (1st March 2004)

Beko Technologies has launched a new refrigeration dryer that promises efficient and more economic drying of compressed air. Flow resistance during the operation of refrigerant dryers is a major cost-contributing factor. With the new Drypoint R units

From Energy management

  ADSORPTION DRYER DEBUT (1st January 2004)

An adsorption dryer has been introduced by Beko Technologies to cope with the specific difficulties of high pressure compressed air drying. High pressure compressed air that shows stronger contamination by solid particles, oil and sometimes aggressiv

From Energy management

  High pressure adsorption dryer (1st November 2003)

An adsorption dryer has been introduced by Beko Technologies to cope with the specific difficulties of high pressure compressed air drying. The Drypoint AC HP is suited to processes that need an unvarying supply of high-quality compressed air and a c

From Plant process control

  Energy efficient (1st September 2003)

Compressed air water separators have been added by Beko Technologies to its Clearpoint product line. There are 18 models in the new range, with volumetric flow ranging from 35 to 31 240m3/h. Energy efficiency is a key factor. A swirl motion maximises

From Plant process control