Internal 3d x-ray inspections (1st November 2008)

3DX-RAY's MDXi x-ray analysis and inspection system is an integrated, transportable, turn-key, measurement and vision system that offers advanced x-ray imaging capabilities and fault detection.

From Production engineering

  3d x-ray system (1st March 2008)

3DX-Ray's new x-ray vision inspection system can be wheeled around a factory to cope with fastchanging demands. The MDXi is self-contained but can be easily linked into a factory system. It works in both batch mode or a

From Production engineering

  Provides inline x-ray inspection (1st January 2008)

Prompted by the growing need for 100% fault-free devices, 3DX-Ray has introduced X-Line, an inline xray inspection, measurement and QC system accurate enough to check the precise alignment of both needles and devi

From Production engineering

  In-line x-ray inspection (1st November 2007)

X-Line, from 3DX-RAY, is an automated, in-line, x-ray inspection, measurement and QC system that links directly into most factory SCADA or SPC systems. It produces a series of precise 3D measurements and checks the size, dept

From Production engineering

  X-rays blister packs (1st January 2007)

As the pharmaceutical industry moves towards 100% verification, the problem of checking billions of unitary dose blister packs is a large one. A blister without its tablet or capsule is not only a health risk to the patient,

From Production engineering

Flexible batch inspection in 2 and 3D (15th December 2006)

MDXi is a flexible batch inspection system that offers conventional 2D x-ray imaging and a 3D X-ray system that can check internal components and alignments to an accuracy of around 100 microns. It can be used off-line and in-line – and can even build, measure and display a full 3D image of an internal structure in the same way as a CAT scan but at a fraction of the cost.

From Newsletter Stories

  Flexible batch inspection (1st November 2006)

MDXi, from 3DX-Ray, is a flexible batch inspection system that offers conventional 2D x-ray imaging and a 3D X-ray system that can check internal components and alignments to an accuracy of around 100 microns. It can be used

From Production engineering

  The inside story (1st July 2006)

X-Line, from 3DX-Ray, is an automated in-line X-ray inspection, measurement and QC system that offers complete internal imaging of anything on a production line from a blister pack to a finished metal, plastic or composite product. It lets you check

From Production engineering